How to maintain the weighing module on the dynamic checkweigher

The weight sensor on the automatic checkweigher is a very important component of the net weight sorting equipment. Its function is mainly to measure the net weight of the screened object and convert it into an output signal. It can measure and control the screened object automatically, in an integrated and intelligent manner by connecting to a computer. This is the product of the combination of modern measurement technology and computer technology.

The tensile pressure sensor is a very high-precision component, so we must also maintain the tensile pressure sensor when we maintain the net weight sorting machine at ordinary times. The tensile pressure sensor is generally installed on the viewing side of the sorting machine scale. When the material on the belt passes through the net weight sorting machine scale body, the net weight of the material is measured by the weighing structure to the load sensor. The load sensor receives the voltage signal, and the sensor measures and transmits it to the system control board. After calculation by the system control board, the instantaneous speed net weight and the total compliance rate of the material are obtained.

It can be seen that the maintenance of the tensile pressure sensor is very important. During the use process, we need to pay attention to the following points:
1. After the equipment is turned off every day, the materials on the sensor of the net weight sorting machine should be cleaned in time to prevent the long-term load of the materials from affecting the accuracy of the sensor and affecting the accuracy of the test.
2. Tighten all components regularly to avoid the environment with large electromagnetic fields and obvious heat transfer to avoid damage.
3. We also need to clean the dust on the equipment regularly and keep the equipment clean to avoid affecting the weight test of each component of the net weight sorting machine.